Here is the datalog I took at around 9:30pm 6/26/23. Car has a P0351 ignition coil bank a (cyl 1) open circuit code even after swapping around the cylinder 1 and 3 coil packs. This has been occurring on and off since I installed a new wiring harness on the car. I have fixed multiple issues with the install so far, including the DI ECU bottom bolt bracket, 2 connectors on the cyl 1/3 fuel rail bank being in the wrong place, one of the grounds for the wiring harness not being bolted down all the way. I have also checked over plenty of connections on the rest of the harness to make sure they are secure, as well as going over the transmission ground. Engine and trans setup is from a 2014 A/T Scion FR-S, both have 66,000 miles on them.