 SimosTools Tune v2.5 Log Map5 3rd Gear PullIdk, I keep feeding it timing and it seems to not hate everything. Some weird warbling of RPM around 5900rpm and up around 6400rpm. Version 2.6 is going to continue with adding timing to the upper end in areas where there's not knock and testing, but this is going to be largely fine-tuning at this point. An ~80mb log exists that won't be uploaded but will be used to dial in low and medium load behavior.
|
|
SimosTools Tune v2.4 Map5 3rd Gear Logs (x3) Spiciest tune to date -- pulls great, review pending for fine tuning.
|
|
SimosTools Tune v2.3 Log Map5 3rd Gear Pull Cooler temps, one on map5 just to see. Minor (-.75 timing) KR happening still, let's see what's going on.
|
|
SimosTools Tune v2.3 Log Map5 3rd Gear Pull This was the 'safe' timing from before, but with more boost. Saw some timing pull for knock that isn't logged (will need to set up knock logging) but vdyno reports 336whp and I'm over the moon about it. Continue to test.
|
|
SimosTools Tune v2.2 Log Map4 3rd Gear Pulls Two 3rd gear pulls on Map5. Ambient temps >90℉. Map5 had knock, this map is a little less aggressive across the board. Uploading for comparison/to see what the middle looks like.
|