2/12/23 CSV files 2 Issues: 1st - cannot get auto-log to start. I'm looking into this, so both runs I attached were manually started. ****** 2nd - cylinder cuts out quickly when going wot. This happened multiple times w/o it auto-logging, so what I have is the last run I did with a manual log. I have made a couple major changes prior to trying to run this map (factory turbos -> new RB Two turbos, changing from silicone inlets -> relocated inlets, and removing my JB4), so not sure if something i have done there is deficient and causing the massive mis-fire. It seems to drive fine under normal/medium acceleration w/o issue.******* 2023-02-12 12_37_12 shows me with a more controlled acceleration. I could probably get higher in the RPM range. I chose to not go to 7000 RPM due to the concern I had with my WOT runs.********** 2023-02-12 12_41_21 shows me attempting WOT. This was very repeatable for me, just at different RPMs.