userveer90
|
05/03/2018
|
both trim pots set at 65k ohms, soldered into bank 1 and bank 2 knock sensor wires in the DME compartment
|
02/18/2018
|
v2.6 and v2.7 are identical in terms of load target and fueling, only difference is 2 degrees of timing added in 2.7. Trim pots were installed for 11-30 logs, to manually desensitize knock sensors (65k ohms) for built motor.
|
12/01/2017
|
full timing maps, desensitize knock sensors checked. also included a pull in 2nd gear
|
10/12/2017
|
knock tuning map with and without desensitize knock sensors checked
|
10/12/2017
|