 V1.3 Standard MHD settings. Kickdown left aloneV1.3, xHP, Standard MHD settings (did not disable kickdown)
|
11/27/2024
|
|
V1.3 MHD kickdown disabled V1.3 xHP & MHD kickdown disabled
|
11/27/2024
|
|
V1.2 Breaking up on WOT
|
11/26/2024
|
|
Same as before, vacuum hose plugged back in. Same set-up as previously recorded, this time with wastegate hose plugged back in.
|
11/23/2024
|
|
Wastegate set to maximum resistance at closer Pre-loaded the wastegate fully, closed the wastegate flap, and tightened with a couple turns of pre-load tension. Then actuator vacuum hose unplugged for logs. Vacuum reading was about 8.5-9inhg at full closer. Vehicle feeds about 10” at idle.
|
11/23/2024
|