Skip to main content
Home
datazap.me
Menu
  • FAQ
  • Donate
  • Contact
  • Create Account
  • Login
Create Account
Login
userThehakosch
05/18/2025
V25
Map 1 runs very well. Map 2 has a bit too little boost. Could you increase the WGDC ​​a bit so that the mean boost is around 22 psi? Then I'd be happy.
05/18/2025
Options
  • View
05/17/2025
V24.1
Okay, the car now revs over 6000 rpm without any problems. The ignition thing is a bit too much, I think; a little less would be better. I wanted it to start at 7 degrees and have 9 degrees at 5500 rpm, and not more than 9.4. Or simply like in V17. But map 2 has very bumpy acceleration. Could you smooth it out? Map 1 has it a bit at the beginning, but it's better than map 2. Sorry for the stress and annoyance, but after that, it should be fine.
05/17/2025
Options
  • View
05/16/2025
V23
I've now resealed and tested the injectors. I swapped the injector from cylinder 3 to cylinder 6, and the error 29D2 still occurs above 6000 rpm. Could you deactivate the misfire detection above 6000 rpm for cylinder 6 on the V23 and V24?
05/16/2025
Options
  • View
05/08/2025
V23
Could you lower the wgdc again by the same ratio as from v22 to v23? After that, that would be it. I'll leave you alone and stop bothering you.
05/08/2025
Options
  • View
V22
Pulls now better in 3 and 4 but in 5th gear still a bit throttle close and on the end still limp mode code 29d2
05/08/2025
Options
  • View
  • 1
  • 2
  • 3
  • …
  • ›
  • datazap.me  
  • Login
  • Create Account
  • FAQ
  • Donate
  • Contact