 Pottering about No smoke test, cylinder 2 really pulling timing, suspected some sort of plug/coil/injector issue. Started pulling plugs, 5 were loose, can see carbon blowby on the outside of a few plugs in the well, plug 1 looked bent at electrode. 4/6 coils looked ruined. Cleaned out the wells, fitted new plugs, some good coils fitted.
|
08/30/2023
|
Pull
|
08/30/2023
|
Pull (3rd gear) DSC OFF
|
08/30/2023
|
Cold start
|
08/30/2023
|
|
Stall investigation New oil cap, Lambda and idle adaptations reset, fresh MHD stage 2. No leaks found with spraying intake system (smoke test required), MAF cleaned (was clean anyway). Car didn't stall but the revs dropped to 400ish and then surged to not stall when stopping.
|
08/29/2023
|