 stg2+fmic mhd first (only) runJust flashed stage 2 + fmic and did defaults for exhaust burble... did two runs with automatic logging on MHD and apparently only one came out.
Result:
Reduced Power Light
28A2 - Inlet-Vanos variable cam control test
3100 - Boost pressure control, deactivation
Mods:
VRSF 7" FMIC - VRSF CP, Forge DV, BMS DCI, VRSF Downpipes, recent walnut blast + coils + plugs
|
08/05/2016
|
|
ugrades 4/23 new plugs (bosch), coil packs - causing insane increase in ticking - possibly lifters, injectors, valves, plugs, whooo knows!
also installed vrsf cp and forge dv. car is running great, except for overly louder than normal n54 tick.
|
04/23/2016
|
|
09 335i sedan MHD stage 1 / 93 octane + BMS dci First logged pulls with MHD flashed 2009 e90 335i @ ~93k mi.
|
03/22/2016
|
|
Misfire Help Two pulls from 2nd WOT to 3rd - first time doing this so not sure if it is correctly done or if I've even enabled the proper censors.
2009 bmw 335i e90, only mod is BMS DCI - no tune, premium (93 oct) only.
Torque reporting misfires for 'last/current driving cycles(calculated)' in the below cylinders after a 2 hour highway drive with very few WOT or crazy speeds, avg ~75-80mph.
cyl 2 (1)
cyl 3 (4)
cyl 5 (34)
Used MHD to log the data sets uploaded here about an hour after torque report, which was done immediately upon pulling into driveway.
|
03/14/2016
|