userPHP
Log with pull on 3.5 v4 file. Still has boost issue.
Took everything apart after run to check charge connections. No leaks found with smoke test.
Wastegates begin to move when only 1inHg is applied. Reach full stroke at only 5inHg.
Issue has to be boost leak but really not seeing it.
Will put it all back together in morning and retest. Want to stick with this same file for now?
Stage 2 cobb made 357whp 413wtq on 91.
|
04/12/2021
|
Power output still way down at 330whp and 401tq
|
03/24/2021
|
Boost is at spec now but power was actually less- 316whp and 387tq compared to v1 321whp and 399wtq. I tried flashing the map again and basically same result.
|
03/18/2021
|
Car is down on power compared to Cobb stage 2.
399wtq, 321hp compared to 404tq and 349whp on stock turbos.
No codes aside from no dme coding.
Looks like boost is not holding target psi after 4K rpm.
Let me know if I need to do any adapt resets. Installed mhd stage 0 then flashed with your file.
Thank you!
|
03/17/2021
|
V4 logs. Making consistent 440whp and 405wtq mustang numbers |
12/19/2019
|