 Single turbo v5 3.5 barHello I reflashed the car with the new map I went out and did a couple pulls had the duty cycle set to 67 and it made almost 25psi I turned it down to 63 on the duty cycle and it made less boost but for some reason had less rail pressure.
|
11/08/2021
|
|
3rd gear e35 3.5tmap st v4 I installed the new tmap sensor and reflashed with the new settings for the sensor and did a couple logs the first log felt really good very linear no issues, the 2nd pull however the car gave some hesitation around 5k for like a second and then all the boost came again car was still running good after no codes thrown or anything not sure what could’ve caused it.
|
11/02/2021
|
|
Single turbo v4 map new hpfp e35 3rd gear Previously the car was around 800 fuel pressure at the rope of the rpm at 20psi I started to get fuel cut at 18psi so I replaced my hpfp car was running way better so turned it up to see if it would hold above I have a log I did in 3rd gear looks like it held pressure all the way through do you think we can improve on this or should I still keep the car at 18psi?
|
10/10/2021
|
|
Single turbo tune v4 AL boost turned down For this log I used a fuel mix of e35 I turned the duty cycle down from 56 to 47 and now makes 18psi as opposed to almost 22 raul pressured stayed above 1500 the whole time during the pull this time around.
|
08/03/2021
|
|
Single turbo E35 v4 map I mixed a ratio of e35 in the tank and see how the rail reacted with that did the log in 4th gear felt very smooth all the way through no breakups very linear.
|
07/29/2021
|