 Boost Bucking - Not AlwaysBasically Stock ROM - Modified to ignore low load knock readings. Wastegate restriction pill installed - boost returned to factory values around 14lbs. Produces bucking at high boost. If gently easing into WOT, can produce smooth power delivery. CEL has not illuminated since pill was installed and boost restored. CEL used to indicated cyl1 misfire at low load (idle and cruise, vacuum), although power delivery was 99% smooth. Cyl1 compression is low. Perhaps increased boost allows fuel mixture to combust more easily resolving the misfire issue, but then why the bucking?
|
09/11/2019
|
|
Rough Thresholds 1.1-1.2 Rough KC thresholds set to Disable Below 1.1, Enable Above 1.2, Enable Below 2.9, Disable Above 3.0.
FLKC unchanged at Disable Below 8.0, Enable Above 9.0.
|
11/16/2018
|
|
Rough and FLKC Thresholds at 0.8/0.9 - All IAM Changes 11/11 All IAM adjustment moments during 4 trips and 2 resets following reflash for Rough and FLKC threasholds at 0.8/0.9
|
11/14/2018
|
|
Rough and FLKC Thresholds at 0.8/0.9 - RESET 2 Second reset test of higher KC thresholds. IAM drops to 11 on the first drive after ECU reset.
|
11/14/2018
|
|
Rough and FLKC Thresholds at 0.8/0.9 Testing higher thresholds to ignore low load suspected false knock. IAM drops rapidly over the first 3 drives after reflashing ECU.
|
11/14/2018
|