 Oil temperature data logs - cold start unpluggedThis is monitoring the oil temperature PIDs when the car is cold-started (sitting for several hours, coolant temp had dropped to 39C) with the sensor UNPLUGGED from the start. You can see there is temperature modeling going on (as opposed to when unplugged once up to temp, it just seemed to keep the last known good temperature). In the second PID (dropdown menu), the sensor gets plugged back in while running.
|
01/07/2023
|
|
Oil temperature data logs Unplugging and Plugging sensor None of these values completely drop out when unplugging the oil temp/level sensor. The ECU seems to keep the last known good value. While unplugged, the dash reads "---" just like when it is below 120F or about 49C. When it gets plugged back in (second log in the drop-down), the value for "toil" and "toil_raw" jump from 90C to 94C immediately.
|
01/07/2023
|
|
Oil temperature data logs Warm trip Log of temperature after the vehicle had been driven and idled for a bit after the prior cold start and drive logs.
|
01/07/2023
|
|
Oil temperature data logs Cold start + trip Cold start to monitor the oil temperature sensor outputs to try and make sense of the engine oil temp calculations.
|
01/07/2023
|
|
Oil temp data logs Logging multiple oil parameters. For science.
|
01/06/2023
|