4th gear pull I got flashing engine light during pull looks like it got lean and in 3/4 pull top of 3rd it started to break up MHD scan after pulls - DME active codes - None - DME shadow (inactive) codes - 11A401 - Fuel high pressure during fuel injection release: Pressure too low. 11B401 - Fuel high pressure or after enabling injection (2nd ambient condition set after delay): Pressure too low. 2025-08-11 4:04:07 PM - DME active codes - None 2025-08-11 4:03:45 PM - DME active codes - 10BA43 - Intake air temperature sensor, plausibility, cold start: Temperature too low.

DME active codes - 10BA43 - Intake air temperature sensor, plausibility, cold start: Temperature too low. 118401 - Mixture control: Fuel-air mixture too lean, large deviation. 134F04 - Valvetronic, adjustment range: Fault range check. 135C11 - Valvetronic servomotor, position sensors: Signals implausible. - DME shadow (inactive) codes - 108932 unknown 11A401 - Fuel high pressure during fuel injection release: Pressure too low. 11B401 - Fuel high pressure or after enabling injection (2nd ambient condition set after delay): Pressure too low. 11CF30 - Mixture control: Multiple fault. 134F10 - Valvetronic, adjustment range: Stop not taught in due to ambient conditions.