userDavidadscott
Wedge Rev 6 Logs Log 1 - time was 5:46 - car was idling weird with fuel trims completely opposite per bank. Bank 1 would be negative STFT and bank 2 would be positive 34 sometimes too.
Log 2 - time was 6:29 - this was a normal log pull. Car seems to run good in higher rpm. No issues or codes
|
Wedge Rev 5 Log 1 Car pulled good. No issues during pull. One error code after pull: 2AAF
|
Wedge Rev 4 Log 1 Car ran good. No codes or issues during the pull except a backfire/pop at end of pull towards 7k RPM
|
Wedge Rev 3 Log 1 Car ran great. Log done in 3rd gear. Still slight lag at WOT but definitely better response than previous rev. No active codes. One shadow code: MHD001-CAN Sensor 1 Timeout
|
Wedge Rev 2 Log 2 - FRESH TANK OF E85 Log taken at 17:57 - 3rd gear pull / ECA was 68% / error code 29D0 misfire on cyl 4 / car sounded bad after the pull and sort of broke up during pull / pulled over, disconnected coil and injector on cyl 4 and reconnected, restarted car and everything was fine after - no more misfire
|