Wot till 2500 RPM feels good, then it starts to stutter and goes into what i like to call (misfire mode) aka running on 5 cylinders, i will stop switch the car off and start it again and will be fine. I cant get a good log due to this reason, i swopped spark plug 5 and 6 and also coil pack 4 and 6 to see if anything jumps, but no luck. Codes i get is 29cc several cylinders misfire and 29d2 misfire on 6 The only thing that changed was i installed 3.5 bar sensor, and yes i did tick it MHD settings. I've attached 3 logs, one i was able to lean into it at about 4k rpm and was able to do a pull. I've noticed in some logs the car is boosting way higher that target and also my bank 2 AFR leans out hoping that it might have something with whats going on. LPFP upgrade is ordered