 map 38 first two pulls meth 50/50 spray 12psi to 17.5psi , log 4 is no meth as i disconneted the aem controler.. still feels like timing pulls... I just received 3 more index 12 injectors for bank 1 9 not installed yet) as that will be everything i can think of pretty much new within a few thousand KM. Thoughts???? weather here is 1.5Deg so almost freezing,,, that should help i would think dense air equals HP.. Log 3 was a very solid pull
|
01/13/2017
|
|
Map 37 one pull Meth set at spraying upon boost. smaller nozzle , cm7 or what ever the smallest in the set off 3 from AEM is. shell 91. 50/50 meth water. Anyhow i havent looked at the log but it felt like timing was pulling.. Im super annoyed. i have put new coils, new spark plugs, clean the air filter , changed a vanos solinoid, changed a oil sensor, oil changed twice as it was plugged with my serpintine belt hence the limp mode and vanos codes. i did bank 2 injectors with index 12 coded and checked twice. How can i pull timing on meth with all that stuff replaced. plus just lately my idle is a bit rough, Im hoping you can read the logs and help in some way. this is the less aggressive map to. 34 was the fastest..
|
11/10/2016
|
|
map 36 one pull map 36 my meth was flashing low but i still think it sprayed/
|
09/06/2016
|
|
map 35 logs 1-2 first two pulls on map 35
|
08/27/2016
|
|
Map 35 Map 35 , meth 50/50 water methanol. spraying at 6psi proggressive to 17.5psi. CM10 nozzle. Cheveron 91 Octane with up to 10% ethanol in it. did 5 pulls 1-2 to allow the DME to adapt. 4-5 were the best pulls.
|
08/27/2016
|