 Pure 600 V3Pulls were made at 9500 feet. I forgot to disable DTC but I do not believe it came on during any of the pulls. Happy to re-do if necessary, just let me know. Did not throw any codes. Still felt strong but I can tell it’s making less power than the v2 map was at 5500 feet.
Drive-ability is good but I am still getting some compressor surge when letting off at low rpm/boost. I am also getting a strange “inhale exhale” noise from the BOV when driving under partial throttle at low RPM. It sounds cool but I’m not sure if that’s supposed to be happening.
|
09/14/2021
|
|
Pure 600 v2 Butt dyno says she is already making some steam!! Pulls really clean but there is some compressor surge and turbo flutter when letting off throttle at lower PSI.
Car has a small oil leak from one of the turbo drains. I’ve been topping it off but please let me know if you see any irregularities in oil pressure.
|
09/05/2021
|
|
Pure 600 base map Everything felt pretty smooth. I held DTC 10 seconds but I’m not sure if it turned off, so hopefully that’s not an issue. It also seems to have taken 2 logs from 1 pull so I uploaded both.
First log was taken at 5500 ft altitude. DA probably closer to 8000 on this hot sunny day.
|
09/04/2021
|