 3rd and 5th gear pulls Wastegate was acting funny at peak boost. Still need to dial it in.
Gain set at 100
Sensitivity at 85
Duty cycle set at 35
Update: I turned down sensitivity to 0 and it’s a lot less jumpy at peak boost and holds between 29.5 and 30.4 but some gear changes it still stutters
|
12/03/2022
|
|
3rd and 5th gear pulls Wastegate was acting funny at peak boost. Still need to dial it in.
Gain at 100
Sensitivity at 85
Peak boost set at 32.3
Duty cycle set at 35
|
12/03/2022
|
|
Jerking while letting off barely and getting back on throttle logs Happens at higher rpm( 3500+) only when boost kicks in
|
11/25/2022
|
|
Datalog with new springs I switched the springs inside the wastegate to 21 psi springs.
|
11/11/2022
|
|
MPR 800 Quick pull to test everything Did a pull with traction control off, mac valve may not be working properly because my wastegate spring pressure is 18psi and log maxes out at 18psi. I’ll see if the plumbing to the wastegate is the problem.
|
11/07/2022
|