generating chart
Change Log
Toggle Layout
Gauge View
Play
Stop
Trim
Zoom Out
Hide Markers
Add View

Log Details

Added December 09, 2019 by 14OWST
Persisting issue new, 3mm silicone hoses for the 2 lines off the BPV Solenoid(unable to route a new line for the vacuum pump due to both ends being different sizes.) New 3mm silicone hoses for the Wastegate Solenoid. Verified connections going from WG Solenoid to compressor housing, to WGA, To turbo inlet. Verified Wastegate Actuator by running a 3mm silicone hose from the canister on the WGA to an air compressor with the regulator set to 8psi(as low as it would go) then slowly applied pressure to the line/WGA and watched the rod move with ease open and when releasing pressure, WGA would snap shut, like it is supposed too.
Persisting issue new, 3mm silicone hoses for the 2 lines off the BPV Solenoid(unable to route a new line for the vacuum pump due to both ends being different sizes.) New 3mm silicone hoses for the Wastegate Solenoid. Verified connections going from WG Solenoid to compressor housing, to WGA, To turbo inlet. Verified Wastegate Actuator by running a 3mm silicone hose from the canister on the WGA to an air compressor with the regulator set to 8psi(as low as it would go) then slowly applied pressure to the line/WGA and watched the rod move with ease open and when releasing pressure, WGA would snap shut, like it is supposed too.
Datalog File: