Methanol

A 4th gear pull. Spraying ethanol/water mix 70:30 by weight through a 600cc nozzle at the charge pipe. Set to trigger at 39% F-IDC of the #1 injector.

A 3rd gear pull. Spraying ethanol/water mix 70:30 by weight through a 600cc nozzle at the charge pipe. Set to trigger at 39% F-IDC of the #1 injector.

Normal driving acceleration logs. I accelerated from a dead stop, kept the pedal light for smooth acceleration. In log #0, I activated cruise control to cruise. In log #1, I did not use cruise control.

Idling logs. Log #0 is cold start idling and then backing out of my garage. Log #1 is idling in P when the engine is hot.

Found the wire. all of the guides i was looking at showed the wrong wiring diagram. It's spraying now and here is the Logs Car will start to burble at 6700 while at idle and misfire on pull

MAF reconnected

MAF disconnected

Reinstalled old SILZKBR8D8S (97506) and Delphi coils cyl 1-4

Revision 4: 3rd gear pull #3